Dywidag recostal RSH continuity system to CARES Appendix TA2, in accordance with Technical Approval Report TA2 - 5075, using BS4449 grade B500B reinforcing bar in sizes 10mm to 16mm.

Production of hot rolled steel bar for the reinforcement of concrete.

Production of continuously cast steel billets Production of hot rolled steel bar for the reinforcement of concrete. Management and organisation activities and operations related to foreign trade and customs clearance including production and service deliveries connected to these activities.

Production of continuously cast steel billet and hot rolled steel bars for the reinforcement of concrete.

SS 560:2016 grade B500B Bar in diameters 8-40mm

Processing of steel reinforcement to BS 8666 Stocking and distribution of BS 4449, BS 4482 and BS 4483 Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

Processing of steel reinforcement to BS 8666 Stocking and distribution of BS 4449, BS 4482 and BS 4483 Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

Processing of steel reinforcement products.

Production of directly reduced iron Production of continuously cast steel billets, beam blanks and blooms. Production of hot rolled steel bar and coil for the reinforcement of concrete. Production of hot rolled plain round steel wire rod in coil. Production of hot rolled non alloy structural steel products (Beams, columns, channels and sheet piles) to the producers and/or customer requirements;

Production of continuously cast steel billets Production of hot rolled steel bar and coil for the reinforcement of concrete

Production of continuously cast steel billet and bloom, hot rolled steel bar and coil for the reinforcement of concrete and structural steel..

SS 560:2016 grade B500B Bar 8 to 40mm SS 560:2016 grade B500B Coil 8 to 16mm SS 560:2016 grade B600B Bar 10 to 32mm

Production of hot rolled steel bar for the reinforcement of concrete

Erico Lenton Plus taper threaded A12, P13 and P14 mechanical couplers tested in accordance with and complying with CARES Appendix TA1-C for use in accordance with Technical Approval Report TA1-C 5009 Issue 4

Erico Lenton taper threaded A12, P13 and P14 mechanical couplers tested in accordance with and complying with BS8597 and additional requirements of CARES Appendix TA1-B for use in accordance with Technical Approval Report TA1-B 5027 Issue 3

Erico Lenton taper threaded A12N, P13LN and P14LN mechanicals couplers, parallel bolt S13N couplers and mechanical anchors D14N and D16N tested in accordance with and complying with CARES Appendix TA1-C for use in accordance with Technical Approval Report TA1-C 5030 Issue 4

Production of BS 5896 2012 high tensile steel wire and strand as follows: Strand: Plain 7-wire strand in tensile strengths up to and including 1860 MPa in the size range 9.3 to 15.7mm

Application of mechanical couplers to reinforcing steel

Processing of steel reinforcement to BS 8666 Stocking and distribution of BS 4449, BS 4482 and BS 4483 Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

Processing of steel reinforcement as stated on attached appendix Processing of steel reinforcement to BS 8666 Stocking and distribution of BS 4449, BS 4482 and BS 4483. Manufacture of pre-assembled MAG welded fabrications including Rollmat using reinforcing bar in the diameter range 10mm to 40mm to the relevant requirements of BS EN ISO 17660 and BS8548 and CARES Quality and Operations Assessment Schedules 11 & 12 using tack and semi-structural joints produced under factory conditions. Application of Dextra Griptec Swaged Parallel Threaded Coupler to CARES Appendix TA1-B using BS4449 grade B500C in the size range 12mm to 50mm for use in accordance with Technical Approval report TA1-B 5005. Application of Dextra Griptec Swaged Parallel Threaded Coupler to CARES Appendix TA1-C using BS4449 grade B500C in the size range 12mm to 40mm for use in accordance with Technical Approval report TA1-C 5014. (Sellafield Type A Mechanical splice). Application of Dextra Rolltec couplers to CARES Appendix TA1-B using BS4449 grade B500C in the size range of 12mm to 32mm for use in accordance with Technical Approval report TA 5042. Application of Dextra Headed bars to CARES Appendix TA1-B and TA1-C using BS4449 grade B500C in the size range 10mm to 20mm for use in accordance with Technical Approval report TA1-B&C 5071 (Sellafield Type A Mechanical splice). Application of Erico Lenton Taper Threaded standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-B using BS 4449 grade B500C in the size range 12mm to 50mm for use in accordance with Technical Approval report TA1B - 5029. Application of Erico Lenton Taper Threaded standard (A12) and positional (P13 and P14) mechanical couplers to CARES Appendix TA1-B using BS 4449 grade B500C in the size range 12 to 50mm (A12) and 12mm to 40mm (P13 and P14) for use in accordance with Technical Approval report TA1B - 5027. Application of Erico Lenton Plus Taper Threaded standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-C using BS4449 grade B500C in the size range 12mm to 40mm for use in accordance with Technical Approval report TA1 - C 5030 (Sellafield Type A Mechanical splice) Application of Erico Lenton Plus Taper Threaded standard (A12) and positional (P13 and P14) mechanical couplers to CARES Appendix TA1-C using BS4449 grade B500C in the size range 16mm to 40mm for use in accordance with Technical Approval report TA1 - C 5009 (Sellafield Type A Mechanical splice)