Processing of steel reinforcement products

Processing of steel reinforcement as stated on attached appendix Processing of steel reinforcement to BS 8666 and BS 4466 Stocking and distribution of BS 4449, BS 4482 and BS 4483 Application of Erico Lenton Taper Threaded standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-B using BS 4449 grade B500C in the size range 12mm to 40mm for use in accordance with Technical Approval report TA1B - 5029 Application of Erico Lenton Taper Threaded standard (A12) and positional (P13 and P14) mechanical couplers to CARES Appendix TA1-B using BS 4449 grade B500C in the size range 12mm to 40mm for use in accordance with Technical Approval report TA1-B 5027. Application of Erico Lenton Plus Taper Threaded standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-C using BS4449 grade B500C in the size range 12mm to 50mm for use in accordance with Technical Approval report TA1 - C 5030 (Sellafield Type A Mechanical splice) Application of Erico Lenton Plus Taper Threaded standard (A12) and positional (P13 and P14) mechanical couplers to CARES Appendix TA1-C using BS 4449 grade B500C in the size range 12mm to 50mm for use in accordance with Technical Approval report TA1 - C 5009 (Sellafield Type A Mechanical splice) Application of Dextra Griptec Swaged Parallel Threaded Coupler to CARES Appendix TA1-B using BS4449 grade B500C in the size range 12mm to 40mm in accordance with Technical Approval report TA1-B 5005. Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

Processing of steel reinforcement products

Processing of steel reinforcement to BS 8666 and BS 4466 Stocking and distribution of BS 4449, BS 4482 and BS 4483 Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

Processing of steel reinforcement products

BS4449:2005 grade B500A coil in the size range 6 to 12mm cold rolled BS4482:1985 BS4483:1998 and BS4483:2005 Stocking and Distribution of BS 4449 rebar

Processing of steel reinforcement products

Production of BS 5896 2012 high tensile steel wire and strand as follows: Wire : Plain and indented wire in tensile strengths up to and including 1770 MPa in the size range 5 and 7 mm Strand: Plain 7-wire strand in tensile strengths up to and including 1770 MPa in the size 9.3mm;

Plain round coil feedstock for BS 4449 and BS 4482, 5.5 to 17mm

BS EN 10025 2004 Part 2 Non-alloy structural steels S235 J0 and JR; 3.0 to 16.0 mm thick and 10 to 80 mm wide S235 JR; under 3.0 mm thick and 10 to 30 mm wide S275 J2, J0 and JR; 3.0 to 16.0 mm thick and 10 to 80 mm wide S275 JR; under 3.0 mm thick and 10 to 30 mm wide S355 K2, J2, J0 and JR; 3.0 to 16.0 mm thick and 10 to 80 mm wide

On-site processing of reinforcing steels in accordance with CARES Quality and Operations Assessment Schedule 7. Manufacture of pre-assembled Manual metal arc (MMA) welded fabrications using reinforcing bar in the diameter range 10mm to 40mm to the relevant requirements of BS EN ISO 17660 and BS8548 and CARES Quality and Operations Assessment Schedules 11 & 12 using tack and semi-structural joints produced under site conditions.

Processing of steel reinforcement products.

CARES Appendix PT2: Supply and Installation of Post - Tensioning Systems (Slabs) using a Post Tensioning System with a valid ETA under ETAG013 or CARES Approved System to PT 3 and using Prebagged grout which is CARES approved to CARES Appendix PT10 complying with BS EN 447 and execution specification. Approved area of Operation: UK BS EN ISO 9001: 2008

Processing of steel reinforcement to BS 8666 and BS 4466 Stocking and distribution of BS 4449, BS 4482 and BS 4483 Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

Processing of steel reinforcement products

Processing of steel reinforcement products.

Processing of steel reinforcement products

Production of high tensile steel wire and strand for the prestressing of concrete

Design supply, and installation of post tensioned systems in concrete structures. Remediation and repair of concrete structures

Supply and Installation of Post-Tensioning Systems as stated on attached appendix CARES Appendix PT1 for the Supply and Installation of Strand Post-Tensioning Systems in Concrete Structures using PT Kit "CCL 'XM' Multistrand Bonded/Unbonded" system complying ETA 07/0035 and using Parex Cable Grout. CARES Appendix PT2: Supply and Installation of Post - Tensioning Systems (Slabs) using a Post Tensioning System with a valid ETA under ETAG013 or CARES Approved System to PT3 and using Prebagged grout which is CARES approved to CARES Appendix PT10 complying with BS EN 447 and execution specification. CARES Appendix PT5 for the Supply and Installation of Void Grouting Post-Tensioning Systems in Concrete Structures. CARES Appendix PT4 for the Supply and Installation of Bar Post-Tensioning Systems in Concrete Structures using a Bar PT system with a valid EAD complying with ETAG013 and using Parex Cable Grout. Approved area of Operation: UK

The design, manufacture and supply of mechanical products and equipment along with mechancial and Elastomeric bridge bearings and sub-contract machining services

Post Tensioning Kit Post Tensioning Kit in accordance with the requirements of European Technical Approval Guideline 013 (ETAG 013) CCL 'XU' Monostrand Unbonded System CCL 'XF' Multistrand Bonded System

Manufacture and supply of mechanical products and equipment along with mechanical and elastomeric bridge bearings and sub-contract machining services