BS EN 12794 2005 Single length precast concrete foundation piles Single length precast concrete foundation piles class 1: length 3m to 15m and class 1 precast segmental piles with UNIjoint class D joints: width 190 by 190mm to 350 by 350mm and Multi Joint Class 1 pile with Class A joint in the size range 200 x 200mm to 400 x 400mm.

Production of high tensile steel wire and strand for the prestressing of concrete

Wire drawing and cutting to length Manufacture of bright drawn steel wire including straightening, where specified, and stocking and distribution of steel wire with or without lot traceability as appropriate

Bartec Linxion Standard type C and PI parallel threaded mechancical couplers tested in accordance with and complying with BS8597 and additional requirements of CARES Appendix TA1-B for use in accordance with Technical Approval Report TA1-B 5053 Issue 4

BARUS SimGrip parallel threaded mechanical couplers tested in accordance with and complying with BS8597 and additional requirements of CARES Appendix TA1-B for use in-accordance with Technical Approval Report TA1-B 5064 issue 1

Production of continuously cast steel billets Production of hot rolled steel bars for the reinforcement of concrete

Production of continuously cast steel billets and steel bars for the reinforcement of concrete.

ASTM A615 Grade 60 bar in the size range 8 to 40mm ASTM A615 Grade 40 bar in the size range 10 to 20mm

Production of continuously cast steel billets Production of hot rolled steel bars for the reinforcement of concrete

Processing of steel reinforcement products.

BS 4449 2005 Grade B500B Bar 10 to 32mm

Production of continuously cast steel billets Production of hot rolled steel wire rod for the reinforcement of concrete

Betomax Comax reinforcement continuity system complying with CARES Appendix TA2 using BS4449 grade B500B reinforcing bar in sizes 10mm to 16mm for use in accordance with Technical Approval Report TA2 - 5072 issue 1

Processing of steel reinforcement products

BMS Type A, B and C parallel threaded mechanical couplers tested in accordance with and complying with BS8597 and additional requirements of CARES Appendices TA1-A and TA1-B for use in accordance with Technical Approval Report TA1-A&B-5016 issue 3

Stocking and distribution of BS 4449, BS 4482 and BS 4483;

Processing of steel reinforcement products

Processing of steel reinforcement products

Processing of steel reinforcement products

Processing of steel reinforcement as stated on attached appendix Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme Processing of steel reinforcement to BS 8666. Stocking and distribution of BS 4449, BS 4482 and BS 4483. Application of Erico Lenton Taper Threaded standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-B using BS 4449 grade B500C in the size range 12mm to 50mm for use in accordance with Technical Approval report TA1B - 5029. Application of Erico Lenton Taper Threaded standard (A12) and positional (P13 and P14) mechanical couplers to CARES Appendix TA1-B using BS 4449 grade B500C in the size range 12mm to 50mm (A12) and 12mm to 40mm (P13 and P14) for use in accordance with Technical Approval report TA1-B 5027. Application of Ancon Taper Threaded Coupler to CARES Appendix TA1-B using BS4449 grade B500C in the size range 12mm to 40mm in accordance with Technical Approval report TA1-B 5015. Application of Ancon Bartec Plus Parallel Threaded Coupler to CARES Appendix TA1-B using BS4449 grade B500C in the size range 16mm to 40mm in accordance with Technical Approval report TA1-B 5055. Application of Ancon Bartec Plus Parallel Threaded Coupler to CARES Appendix TA1-A using BS4449 grade B500C in the size range 16mm to 40mm in accordance with Technical Approval report TA1-A 5050. Application of Dextra Griptec Swaged Parallel Threaded Coupler to CARES Appendix TA1-B using BS4449 grade B500C in the size range 12mm to 40mm in accordance with Technical Approval report TA1-B 5005. Application of Erico Lenton Plus standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-C using BS4449 grade B500C in diameters 12 to 40mm for use in accordance with Technical Approval report TA1C - 5030.